Chimney Liner & Rebuild Cost - You See the Footage Before You Get a Price

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Chimney Liner & Rebuild Cost in White Plains?

Chimney liner installation in White Plains, NY typically runs between $2,400 and $7,200, depending on liner type, flue height, and whether any masonry repair is needed alongside it. A full chimney rebuild - tearing down and reconstructing the masonry above the roofline - generally costs between $3,500 and $12,000 for most White Plains homes. Most jobs fall in the middle of those ranges, and we’ll give you an exact number before any work begins.

Chimney Liner & Rebuild Cost Breakdown (2026)

The table below reflects what Hearthstone Chimney Co. actually sees in the White Plains market as of 2026. Prices can shift based on your chimney’s height, the liner material you choose, and whether our Level-2 camera inspection turns up damage that needs to be addressed before the liner goes in.

A few things drive those ranges. Liner length is the biggest lever: a two-story colonial in the Bryant Gardens neighborhood with a 28-foot flue costs more to line than a ranch-style home in Gedney Farms with a 15-foot straight run. Material grade matters too. We use DuraFlex and Olympia Chimney liner systems because they carry proper UL listings and hold up to the freeze-thaw cycles White Plains gets every winter – not builder-grade material that a chain operation buys by the pallet.

If your masonry is in poor shape, the liner cost doesn’t go away – but repairing it first protects the liner you’re about to pay for. Skipping that step is a false economy we’ve watched homeowners regret. Our Chimney Liner & Rebuild in White Plains service page walks through the full scope of what each job typically involves.

What’s Usually Included in the Quoted Price

• The liner itself, cut to your flue’s exact dimensions
• A stainless steel top plate and connector at the appliance end
• Installation labor – most liner jobs in White Plains are completed in a single visit
• Debris cleanup inside and outside your home
• A post-installation draft check to confirm the system draws properly

What’s typically separate: the Level-2 camera inspection if you don’t already have a current one, any masonry repair uncovered during that inspection, and a new chimney cap if yours is missing or corroded. We price those line items plainly on the estimate so you know exactly what you’re looking at before anyone picks up a tool.

What Affects Chimney Liner & Rebuild Pricing in White Plains

White Plains has its own set of conditions that move the needle on liner and rebuild costs. These aren’t abstract variables – they’re things Russell Haines and our crew see on actual jobs in this city every season.

• Flue height and configuration. White Plains has a wide mix of housing stock – everything from compact post-war Cape Cods near Mamaroneck Avenue to taller Victorians up toward North Broadway. A flue on a two-and-a-half-story Victorian can easily run 30 feet or more. Every additional foot of liner adds material and labor cost, and offsets or bends in the flue path require flexible liner rather than the less expensive rigid sections.
• Liner material and fuel type. A gas appliance liner can be a lighter-gauge flexible stainless – think .005-inch-wall alloy – while a wood-burning system calls for a heavier .006-inch or thicker wall to handle sustained high temperatures. HeatShield cast-in-place resurfacing is the right call when the original clay tile liner has cracks throughout but the overall masonry shell is sound: it fills voids, bonds to the tile, and produces a smooth surface. Each option sits at a different price point.
• Condition of existing masonry. White Plains winters are hard on chimneys. The freeze-thaw cycle that hits Westchester County between November and March forces water into tiny cracks in mortar joints, expands them, and does it again the following night. Chimneys that haven’t been tuck-pointed in fifteen years often need joint repair before a liner can be safely installed. That adds to the quote – but omitting it would be irresponsible.
• Roof pitch and access. Steeper roofs mean more complex staging, longer labor hours, and sometimes a second crew member for safety. Properties on the hillier streets west of the Bronx River Parkway occasionally need a longer ladder setup or a small lift for safe access. We factor that in honestly rather than hiding it in a change order. And a note on safety: high-roof work is not a DIY task – the combination of steep pitch and chimney access creates genuine fall risk that requires proper equipment and trained hands.
• Permit requirements. The City of White Plains Building Department requires a permit for chimney liner replacement when it’s connected to a heating appliance. The permit process adds a modest cost and a scheduling step, but it also means the work is inspected and recorded – which matters when you sell the house. We handle the permit paperwork.
• Scope of rebuild. A partial rebuild – pulling down deteriorated brick above the roofline and relaying it – costs a fraction of a full rebuild that takes the chimney down to the firebox and starts fresh. In the Battle Hill and Fisher Hill sections of White Plains, we regularly see older colonials where the top four or five courses of brick have shifted and spalled while the lower masonry is still solid. A partial rebuild in that situation is the right fix and costs considerably less than tearing it all down.

How to Save on Chimney Liner & Rebuild

There are legitimate ways to keep costs manageable. There are also ways to cut corners that tend to cost more in a few years. Here’s the honest version.

Combine work in a single visit

If your chimney needs a liner and a new crown, or a liner and smoke chamber parging, scheduling it all at once is almost always cheaper than two separate mobilizations. Our technicians complete most White Plains jobs in a single visit precisely because we scope the work before we arrive – so if you know something else is off, mention it when you call.

Get the inspection before the emergency

A Level-2 camera inspection runs $250 to $400 in the White Plains market. That same inspection, when it catches a cracked liner or failing mortar before carbon monoxide becomes a concern or before a chimney fire forces the issue, saves you from making a rushed, expensive decision in January. Homeowners who call us after a chimney fire in Gedney Farms or North White Plains almost always wish they’d had the inspection the prior fall. The numbers work out clearly in favor of the inspection.

Ask about our standing offers

Hearthstone currently offers $50 off any repair over $250 and a permanent 5% discount for seniors and veterans. If you have a written estimate from another company, our Free Second Opinion offer means we’ll review it at no charge and tell you plainly whether the scope and price make sense. We’re not going to manufacture reasons to disagree – but we have caught liner quotes that were either significantly overbuilt or that missed damage the homeowner needed to know about.

Don’t wait until the problem is obvious

A liner with minor cracking costs a fraction of what a liner with full structural failure costs – and far less than a chimney fire or carbon monoxide remediation. The same is true of masonry: a $600 tuck-pointing job today can prevent a $5,000 partial rebuild in three years. We say this not to alarm anyone but because it’s what the numbers show after 42 years of chimney work in Westchester County.

Call for a free estimate

We don’t charge for estimates on liner and rebuild work in White Plains. Call (914) 603-1360 – a live person will answer – and we’ll schedule a time that works for you. The number on the estimate is the number on the invoice. No surprises.

White Plains-Specific Notes Worth Knowing

White Plains is a dense, varied city – roughly 58,000 people packed into about 10 square miles of mixed housing stock that ranges from pre-war brick colonials to mid-century ranches to newer construction near the Galleria district. That variety means no two chimney jobs are quite the same.

In neighborhoods like Eastview and the streets east of Mamaroneck Avenue, we see a lot of older clay tile liner systems that were installed when those homes were built in the 1940s and 1950s. Clay tile was the standard then, and most of those liners have served their purpose – but at 70-plus years old, they’re well past their expected service life. Cracks are common. HeatShield resurfacing is often the right call when the surrounding masonry is still solid, because it rehabilitates the existing flue rather than replacing it entirely.

In newer construction closer to the I-287 corridor and in multi-family buildings near White Plains Road, liner issues tend to involve improper sizing for modern high-efficiency appliances. A gas insert or a high-efficiency boiler connected to an oversized original flue creates condensation problems that corrode the liner and can cause dangerous backdrafting. Relining with a properly sized flexible stainless liner – sized to the appliance’s BTU output, not the original flue dimensions – fixes the root problem.

And then there are the chimneys that simply haven’t been touched since the Reagan administration. We see those in every neighborhood. The exterior looks fine from the street, but a Level-2 camera reveals liner sections that have separated, mortar joints that have failed internally, or a smoke chamber with no parging at all. Those discoveries aren’t fun to deliver, but they’re better than the alternative of finding out during a fire.

Russell Haines has been doing this work in White Plains and the surrounding Westchester communities since 1984, and the patterns are familiar by now. The goal hasn’t changed: tell the homeowner exactly what they have, explain what it needs, and do that work correctly the first time. You can learn more about our full range of work on the home page.

FAQs – Chimney Liner & Rebuild Cost in White Plains

How much does chimney liner replacement cost in White Plains, NY?

Chimney liner replacement in White Plains runs between $2,400 and $4,600 for a standard flexible stainless steel liner, depending on flue length and the fuel type the liner needs to handle. HeatShield cast-in-place resurfacing – used when the clay tile liner has widespread cracking but the masonry shell is sound – typically costs $2,800 to $5,500. Those are installed prices with labor included. Call (914) 603-1360 for a free estimate specific to your chimney.

Is it cheaper to reline a chimney or rebuild it?

Relining is almost always less expensive than rebuilding. A new liner typically costs $2,400 to $5,500 in the White Plains market; a partial or full rebuild runs $3,500 to $12,000. Relining is the right answer when the masonry structure itself is sound but the flue is compromised. Rebuilding becomes necessary when the masonry has deteriorated to the point where it can no longer safely contain combustion gases or support a liner – usually identified through a Level-2 inspection. If you’ve received a rebuild quote, our Free Second Opinion offer is worth a call.

Do I need a permit for chimney liner replacement in White Plains?

Yes. The City of White Plains Building Department requires a permit for chimney liner work connected to a heating appliance. The permit adds a modest cost and a short lead time, but it also creates a record of the work – which matters for your homeowner’s insurance and for any future sale of the property. Hearthstone handles the permit filing as part of the job.

How long does a chimney liner last?

A stainless steel liner installed with professional-grade material – like the DuraFlex and Olympia Chimney systems we use – typically carries a manufacturer warranty in the range of 15 to 25 years and often lasts longer with proper annual maintenance. Clay tile liners can last 50 years in good conditions but deteriorate faster in climates like White Plains, where repeated freeze-thaw cycles stress the mortar and the tile. HeatShield resurfacing is rated for a minimum of 20 years when properly applied. Annual sweeping and a Level-2 inspection every two years are the best way to maximize liner life regardless of the material.

Can you complete a chimney liner installation in one day?

Most chimney liner installations in White Plains are completed in a single visit, typically four to six hours for a standard two-story home. A full chimney rebuild takes longer – usually two to three days depending on the scope – and requires mortar cure time before the system can be used. When you call us, we’ll give you an honest time estimate based on what your job involves, not a best-case scenario designed to get you to book.

What’s the difference between a chimney liner and a chimney rebuild?

A chimney liner runs inside the flue – it’s the tube that channels combustion gases and heat from your firebox or appliance to the outside. A chimney rebuild involves the masonry structure itself: the brick, mortar, and crown that make up the chimney’s body. Some homes need both at the same time – our Chimney Liner & Rebuild services can restore the structural integrity of the chimney and ensure the flue meets current safety standards. Others need only one or the other. A Level-2 camera inspection is the only reliable way to know which applies to your chimney.

Key Takeaways

• Chimney liner replacement in White Plains typically costs $2,400 to $5,500, depending on liner type and flue length.
• A partial chimney rebuild runs $3,500 to $6,500; a full rebuild can reach $12,000 for larger White Plains homes.
• White Plains requires a building permit for liner work on heating appliances – we file it for you.
• The freeze-thaw cycle in Westchester accelerates liner and mortar deterioration; homes over 30 years old should have a Level-2 inspection if they haven’t had one recently.
• All Hearthstone work is covered by the 90-Day Done Right Promise – in writing, no arguing, no paperwork chase.
• Estimates are free. The number on the estimate is the number on the invoice.

Get a Free Estimate on Chimney Liner or Rebuild Work in White Plains

If you’re trying to figure out what your chimney actually needs – a liner, a rebuild, or something else – the right starting point is a straight conversation and an honest inspection. Hearthstone Chimney Co. has been doing that work in White Plains since 1984. Russell Haines and our crew have seen every variation of chimney condition this city’s housing stock produces, and we’ll tell you plainly what we find.

Call (914) 603-1360 any time. A live person will answer. We’ll schedule your free estimate at a time that works for you, show up when we say we will, and give you a written price before any work begins. If the job gets done and something isn’t right, the 90-Day Done Right Promise brings us back to make it right – no arguing, no paperwork, just the thing done correctly.

That’s been the standard at Hearthstone for over 42 years, and it’s not changing.

Pricing reflects the White Plains, NY market as of 2026. Individual job costs vary based on chimney height, liner material, and scope of masonry work identified during inspection. Hearthstone Chimney Co. offers free estimates – call (914) 603-1360 for a quote specific to your home.

Written by Russell Haines, Owner at Hearthstone Chimney Co., serving White Plains, NY since 1984.