Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Scarsdale
Chimney Repair in Scarsdale for cap and crown work typically runs $280-$1,850 depending on whether you need a single-flue cap replacement or full crown rebuild on a multi-flue Tudor stack, and most jobs are completed in one visit with materials stocked for Scarsdale’s common chimney sizes. We’re familiar with the village’s 1920s-1940s estates from Fox Meadow to Heathcote to Greenacres, and our crews serve Scarsdale directly from our New York City dispatch office. If you’re seeing water in the firebox, hearing animals in the flue, or noticing mortar crumbs on the roof, call (914) 603-1360 - a live person answers, day or night.
Why Hearthstone Chimney Co. Is Scarsdale’s Preferred Chimney Cap & Crown Company
We’ve been answering the phone with a live person for over 42 years, and that steady presence matters in a village where homeowners have long memories about contractors who disappeared mid-job. Our Scarsdale customers are typically in their homes twenty-plus years, and they want the repair done correctly so they never revisit it.
Our Level-2 camera inspections end with photos you can see and a plain-English verdict - documented like an engineer, explained like a craftsman. No recommendation is made without evidence on screen. The 90-Day Done Right Promise backs every job in writing: if it’s not right, we make it right, no paperwork, no arguing. Background-checked, uniformed technicians arrive when scheduled, and no-hassle upfront pricing means the estimate number matches the invoice number.
Dispatch and scheduling are coordinated from our New York City office, but crews serve Scarsdale locally and carry caps and crown materials sized for the village’s distinctive tall masonry stacks.
Our Chimney Cap & Crown Services in Scarsdale
Cap Installation
New cap installation on a Scarsdale chimney starts with measuring the flue or flues correctly - and on a Fox Meadow Tudor with three fireplaces and a furnace, that often means four separate openings in one crown. We install Gelco and Famco caps with proper screen height for draft performance, and we size for the actual flue, not the nearest stock dimension. A cap that fits wrong lets rain in or blocks draft. Done right, it keeps water, squirrels, and leaves out of flues that may already hide cracked clay tile from a century-old coal conversion.
Cap Replacement
Scarsdale homeowners often call when the old cap has blown off in a Westchester windstorm or rusted through after twenty years. We replace with professional-grade materials - no builder-grade substitutes - and we check the crown beneath while we’re on the roof. The old cap may have been hiding crown damage for years. We photograph what we find and explain it before any additional work proceeds.
Crown Repair
The crown is the concrete or mortar slab that seals the chimney top between the flue tiles and the brick edge. On Scarsdale’s 1920s-30s chimneys, soft brick and original mortar crowns spall and crack aggressively through our freeze-thaw cycle - temperatures cross 32°F dozens of times each winter, and each cycle forces water deeper into micro-cracks. We rebuild with proper crown mix (not straight mortar, which lacks the cement content to shed water) and slope it correctly so meltwater runs off, not into the smoke chamber.
Crown Coating
When the crown is structurally sound but weathered, crown coating extends its life five to ten years without the cost of full rebuild. We use flexible, breathable coatings formulated for masonry - not the thick elastomeric products that trap moisture and accelerate freeze-thaw damage. This is often the right choice for a Heathcote Tudor where the crown shows hairline cracking but the brick beneath is still solid. We apply it after cleaning and minor tuckpointing, and we show you the before-and-after on camera.
Multi-Flue Cap
Scarsdale’s signature estates frequently need multi-flue caps - one cover protecting two to four flues in a single masonry stack. Single-flue caps from hardware stores leave adjacent flues exposed, which is how squirrels get into the bedroom fireplace while the living room flue is capped. We measure the full footprint, account for proper clearance heights between flues, and install in galvanized steel, stainless, or copper depending on your preference and the home’s exposure. Olympia Chimney multi-flue caps are a common choice for Scarsdale’s larger stacks.
Custom Cap
Some Scarsdale chimneys - especially on architect-designed Tudors with irregular flue spacing or decorative brickwork - need caps fabricated to exact dimensions. We template on site and coordinate with our fabricator for copper or stainless custom work. A custom cap on a century-old chimney is often less expensive than modifying the crown to accept a stock size, and it preserves the architectural detail that makes these homes distinctive.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Scarsdale
We work exclusively with professional-grade brands: Gelco, Olympia Chimney, Famco, and Copperfield. These aren’t builder-grade substitutes - they’re the products that other chimney companies use when they want the job to last. We stock common cap sizes and crown coating materials for Scarsdale’s typical flue dimensions, so most replacements don’t require a second trip. When a custom cap is needed, we template, fabricate, and return - usually within two weeks. The brands matter because a cap that fails in five years costs more than one that lasts twenty.
Common Chimney Cap & Crown Problems We See in Scarsdale Homes
- Spalled crowns shedding water into smoke chambers. Westchester’s freeze-thaw cycle destroys the soft mortar crowns on 1920s Scarsdale chimneys. Water enters hairline cracks, freezes overnight, and widens them until the crown crumbles. Meltwater then runs down the flue, past the damper, and into the firebox - often the first symptom a homeowner notices.
- Single-flue caps leaving multi-flue stacks exposed. A big-box cap installed over one flue on a four-flue Heathcote chimney leaves three flues open to rain and wildlife. We’ve removed squirrel nests from unprotected bedroom flues where the homeowner assumed “the chimney was capped.”
- Cracked clay-tile liners from coal-to-gas conversions. The original flue liner, sized for a coal or oil appliance, was never replaced when a gas furnace was connected. The smaller, cooler gas exhaust condenses moisture against cracked tile, accelerating deterioration. This condition is invisible from the fireplace or roof - only a camera inspection reveals it.
- Low-temperature fires producing glazed creosote. Scarsdale homeowners often burn small aesthetic fires rather than heating loads. These slow burns produce stage-two and stage-three creosote that builds faster than full firebox burns. The chimney that “barely gets used” is frequently the most hazardous one we inspect.
Pricing for Chimney Cap & Crown in Scarsdale, NY
Here’s what Chimney Cap & Crown work costs in the Scarsdale market:
- Single-flue cap replacement: $280-$520
- Multi-flue cap (2-4 flues): $650-$1,200
- Custom fabricated cap (copper or stainless): $1,100-$1,850
- Crown coating (preventive): $450-$780
- Crown rebuild (partial): $890-$1,400
- Crown rebuild (full, multi-flue stack): $1,200-$2,100
Factors that move the price: accessibility (steep roof pitch, height, landscaping), number of flues, extent of underlying brick damage, and whether the flue liner needs addressing before capping. We provide no-hassle upfront pricing - the number on the estimate is the number on the invoice. Estimates are free, and we don’t recommend work you can’t see on camera. Call (914) 603-1360 for an exact quote.
We Also Serve Cities Near Scarsdale
Our crews work throughout southern Westchester County, including Chimney Cap & Crown in Scarsdale and neighboring Hartsdale, White Plains, Irvington, and Harrison. The same 90-Day Done Right Promise, same camera-evidence standard, same live person on the phone applies in every town we serve.
Serving Scarsdale, NY - Our Local Coverage Area
We’re based in the Scarsdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Scarsdale
Yes, because the chimneys that “barely get used” are often the most hazardous ones we find in Scarsdale. Slow, low-temperature aesthetic fires produce glazed creosote faster than full heating burns, and the gas furnace connected to your original coal flue runs all winter regardless of fireplace use. Annual Scarsdale Chimney Cleaning & Sweep with Level-2 inspection and camera documentation catches crown cracks and liner failure before they become water damage or carbon monoxide risks. Call (914) 603-1360 to schedule - estimates are free.
You don’t know without a camera inspection. In Fox Meadow and Heathcote, we regularly find clay-tile liners cracked and undersized from mid-century coal-to-gas conversions that never met current NFPA 211 standards. The furnace may vent adequately on mild days and backdraft on cold ones. Our Level-2 inspection runs a camera the full flue length and provides photos you can see with a plain-English verdict. No reline is recommended unless the camera shows clear failure.
The crown surface cracks first, usually from freeze-thaw cycling of water trapped in porous mortar. On Scarsdale’s 1920s-30s chimneys, the original crowns were often mixed from straight mortar without Portland cement, making them especially vulnerable. Hairline cracks widen each winter until the crown spalls and sheds pieces onto the roof. Water then enters the chimney structure, accelerating brick and mortar deterioration below. Crown coating catches this early; rebuild is needed once the crown loses structural integrity.
Hardware store caps fit standard single flues on modern chimneys - not the multi-flue, irregularly spaced, or oversized flues common on Scarsdale Tudors. A stock cap that doesn’t fit leaves gaps, blocks draft, or blows off in the first strong wind. We measure your actual flue layout and recommend either a stock professional-grade cap in the correct size or a custom fabrication. The cost difference is often less than you’d expect, and the fit is exact.
Demand camera evidence you can see for yourself, and be wary of any company that recommends a reline without it. Our standard is documented like an engineer, explained like a craftsman: photos from the full flue length, pointed out on screen, with a plain-English verdict. On a Heathcote Tudor with three fireplaces and a gas furnace tied into the original coal flue, our tech ran a camera and found a spalled crown shedding water into the smoke chamber, then installed a custom multi-flue copper cap and a crown coating over the failing mortar as part of our Fireplace Services in Scarsdale - without ever recommending a reline the homeowner couldn’t see on screen. If the liner is cracked, we’ll show you. If it’s sound, we’ll say so. Call (914) 603-1360 for an inspection with no pressure and no surprises on the bill.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Scarsdale and Westchester County since 1984.