Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in White Plains: What to Know First

We provide independent Famco chimney cap and crown service in White Plains, with most repairs completed in a single visit and upfront pricing agreed before we start. A standard Famco cap replacement runs $340-$620, while crown repair or coating typically falls between $450-$890 depending on access and extent of damage. We are not affiliated with or authorized by Famco; we are an independent service provider who stocks and installs Famco parts alongside professional-grade alternatives from DuraFlex, HeatShield, and Gelco.

Call (914) 603-1360

This page is for homeowners who already have a Famco cap or crown installed and need honest answers about what’s failing, what it will cost to fix, and whether the repair is worth doing versus replacing. If that sounds like your situation, call (914) 603-1360. A live person answers, 24 hours a day.

How Famco Products Fail - and How We Fix Them

• Famco 304 stainless single-flue caps: The mesh sides on the earlier production runs (roughly 2012-2018) were spot-welded at wider intervals than current spec. In White Plains, where we get driving rain off Long Island Sound combined with freeze-thaw from January through March, those welds crack at the corners and the mesh pulls away from the frame. We see this most often on homes near the Gedney Farm neighborhood with older colonials and tall flue runs. Our fix: we remove the cap, assess whether the frame is still square, and either reattach with continuous seam welding or source a replacement from current Famco stock with the improved joint pattern.
• Famco galvanized multi-flue caps (model M series): The galvanized coating holds up poorly against creosote condensation on oil-fired systems, which are still common in White Plains split-levels from the 1960s and 70s. The zinc layer degrades from the inside out, so the cap looks fine from the ground but the underside is flaking and rusting through. We document this with camera inspection photos you can see yourself, then recommend either a 304 or 316 stainless replacement, depending on whether you’re burning oil or gas.
• Famco draft-inducing caps (WindBeater series): The rotating turbine can seize after five to seven years of exposure to coastal humidity and the fine silt that settles in White Plains during dry summer months. Once seized, it blocks draft rather than improving it. We disassemble the turbine, clean the bearing race, and lubricate with high-temp graphite compound. If the housing is warped from overheating, we replace with a new WindBeater or discuss whether a standard cap with proper flue sizing would serve you better long-term.
• Famco concrete crowns poured with integral drip edges: The drip edge detail is correct in theory, but the concrete mix Famco specified in the 2000s had higher porosity than ideal for our climate. Water wicks through, freezes behind the edge, and spalls the crown face from the bottom up. We’ve repaired dozens of these in the Fisher Hill area where the crowns were installed during the same construction period. Our approach: grind back to sound concrete, apply a bonding agent, and recast with a modified mix we specify for freeze-thaw resistance, or apply a crown coat system from HeatShield if the structural shell is still sound.
• Famco chase covers on prefab chimneys: The factory corners are folded and caulked, not welded, on certain production lots. After ten to fifteen years of thermal cycling, the caulk hardens and the fold opens, letting water run directly onto the chase top and down the flue pipe. We find this on prefab installations in the Highlands and Ridgeway neighborhoods. We remove the chase cover, inspect the wood beneath for rot, and install a replacement with welded corners and a proper storm collar - either Famco OEM if the dimensions match, or a custom-fabricated unit from our sheet metal shop.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, day or night. We ask what you’re burning, how old the installation is, and what you’re seeing - water stains, rust streaks, draft problems, or visible damage. We book a time window and send a confirmation.
2. 2
   Level-2 camera inspection and photos. Our technician arrives in uniform, background-checked, and sets up the camera. You see the footage in real time. We document the cap or crown condition, the flue interior, and any water damage below. You get a plain-English verdict: what needs doing, what can wait, and what you don’t need at all.
3. 3
   Parts decision: OEM, compatible, or upgraded. If your Famco part is still in production and priced fairly, we order OEM. If it’s discontinued or the OEM price doesn’t make sense, we source from our inventory of DuraFlex, HeatShield, Gelco, or Copperfield equivalents - always professional-grade, never builder-grade substitutes. We explain the trade-off before you decide.
4. 4
   The repair, done right. Most Famco cap and crown jobs finish in one visit. We remove the failed component, address any underlying damage we found, install the replacement, and seal or flash to our standard. No shortcuts. The technician checks their work against a written checklist.
5. 5
   Test and document. We run a draft test where applicable, verify water shedding with a controlled spray, and photograph the completed work. You get the photos, the invoice, and the 90-Day Done Right Promise in writing. If it’s not right, we make it right. No arguing, no paperwork chase.
6. 6
   Cleanup and follow-up. We haul away the old material. If the chimney’s doing its job, you won’t think about it. That’s exactly where we want to leave things.

What Famco Chimney Cap & Crown Costs in White Plains

These are real ranges for the Famco work we do in White Plains homes, based on jobs we’ve completed in the past two years. Your exact estimate depends on roof access, height, and what we find once we’re looking inside.

We do not bill by the hour. The number on your estimate is the number on your invoice. Estimates are free, and we do not charge to look. Call (914) 603-1360 for an exact quote on your Famco chimney cap or crown.

Why White Plains Homeowners Call Hearthstone Chimney Co. for Famco Work

We’ve been serving White Plains and nearby communities for over 42 years. Russell Haines learned this trade at Los Angeles Trade-Technical College and has spent more than two decades working on chimneys in the Northeast, where the weather is hard on masonry and metal both. He keeps a worn field notebook going back fifteen years, partly out of habit, partly because he says a chimney will repeat itself if you let it.

Our technicians are background-checked and uniformed. They carry Famco parts and compatible alternatives from DuraFlex, HeatShield, and Gelco, so the job doesn’t stall waiting for a delivery. Most repairs finish in one visit. The 90-Day Done Right Promise covers every job in writing - if it’s not right, we come back. No arguing. Photos you can see, a plain-English verdict, and a square deal with no surprises on the bill. That’s how we’ve worked since 1984, and it’s how we plan to keep working in White Plains for decades ahead.

FAQs