Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across White Plains
Chimney liner installation and rebuild work in White Plains typically runs $2,800-$7,500 depending on whether you’re relining a single flue or addressing structural masonry damage, and most jobs are completed in one visit with materials sized on-site. If your White Plains home still has its original clay liner from the coal or oil era, a Level 2 camera inspection will show exactly what condition it’s in and whether replacement can wait or needs to happen before the next burning season. Call (914) 603-1360 to book - estimates are free, and a live person answers the phone 24 hours a day.
We’ve been dispatching crews to White Plains from our New York City office for decades, and we know the local housing stock cold: the pre-war brick apartment buildings near downtown, the 1940s colonials in Battle Hill and Gedney Farms, the attached two-families along the Post Road corridor. These aren’t generic suburban chimneys. Many were built for coal furnaces, converted to oil heat in the 1950s and 60s without proper relining, and have now endured 70-100 years of thermal cycling. That specific history changes what we find when we inspect, and it changes how we fix it.
Why Hearthstone Chimney Co. Is White Plains’s Preferred Chimney Liner & Rebuild Company
We’ve served communities across Westchester and the greater New York area for over 42 years, and White Plains has always been a core part of our route. Homeowners here tend to stay put - they raise families in these houses, they know their neighbors, and they remember which contractors showed up when they said they would. Our reputation in White Plains was built one job at a time, mostly by word of mouth from homeowners who had already been burned by a low bid that turned into a high surprise.
Our Level 2 inspections end with photos you can see and a plain-English verdict. No jargon, no scare tactics, no recommendation for work we can’t document. If your liner has another five years of safe life, we’ll say so. If it’s cracked and venting carbon monoxide into the wall cavity, we’ll show you the image and explain exactly what needs to happen. The 90-Day Done Right Promise backs every job in writing - if it’s not right, we make it right, no paperwork and no arguing.
Calls are answered by a live person, 24 hours a day, 7 days a week. Not a voicemail, not a callback queue. Our technicians are background-checked, uniformed, and carry the professional-grade materials to complete most liner and rebuild jobs in a single visit. No-hassle upfront pricing means the number on the estimate is the number on the invoice.
Our Chimney Liner & Rebuild Services in White Plains
Stainless Steel Liner Installation
Stainless steel liners are our most common solution for White Plains homes with deteriorated clay flue tiles. We install DuraFlex and Olympia Chimney stainless systems sized precisely to your appliance - whether that’s an oil burner, gas conversion, or wood-burning fireplace. In Battle Hill colonials with two-flue stacks, we often find the oil-side flue was never relined after the original coal-to-oil conversion; a stainless liner brings it to modern draft code without rebuilding the entire chimney structure. Most stainless installations in White Plains run $2,800-$4,200 for a single flue, including the Level 2 inspection and photo documentation.
Flexible Liner Installation
Flexible liners solve the offset and shifting flue problems we see constantly in White Plains’s older masonry. When a chimney was built for coal and later adapted for oil, the flue path often has offsets or narrowings that rigid liner sections can’t navigate. A properly sized flexible liner from Gelco or DuraFlex conforms to these irregular channels while maintaining proper draft. This matters especially in the pre-war brick buildings near downtown White Plains, where chimney structures are encased in party walls and can’t be easily modified. Flexible liner jobs in White Plains typically range $3,200-$4,800 depending on length and access.
Liner Replacement
Full liner replacement becomes necessary when clay tiles are spalled, cracked, or missing sections - conditions we document with camera evidence before recommending any work. White Plains’s inland climate makes this more urgent than homeowners sometimes realize. The sharp freeze-thaw cycles from nor’easters and Hudson Valley cold air drainage aggressively attack mortar joints on exposed brick chimneys. Once water infiltrates through cracked crown mortar, it freezes, expands, and accelerates clay liner deterioration from the outside in. We’ve replaced liners in Gedney Farms homes where the homeowner had no symptoms until our camera revealed a liner missing entire sections. Replacement costs in White Plains generally fall between $3,500-$5,500 for standard residential flues.
Partial Rebuild
Partial rebuilds address the crown, upper courses of brick, or specific flue sections while preserving sound lower structure. This is often the right solution for White Plains chimneys where freeze-thaw damage has spalled the crown and top brick courses but the liner and lower masonry remain sound. We rebuild with matching brick where possible and always install proper crown wash and flashing to prevent recurrence. A typical partial rebuild in White Plains runs $4,500-$6,800, depending on height and scaffolding needs. Our Chimney Liner & Rebuild team completes most of these in a single day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Plains
We don’t use builder-grade substitutes. Every liner and rebuild job in White Plains is spec’d with professional-grade materials from brands that the trade has trusted for decades: DuraFlex stainless and flexible systems, HeatShield cerfractory resurfacing for select clay liner restorations, Gelco and Olympia Chimney components, and Famco and Copperfield fittings and caps. We stock common sizes and configurations locally, which means faster turnaround for White Plains homeowners - most jobs don’t wait on special orders. When we recommend a stainless liner from Olympia Chimney or a DuraFlex flexible system, it’s because that specific product matches your chimney’s dimensions, your appliance’s draft requirements, and Westchester County’s code enforcement standards.
Common Chimney Liner & Rebuild Problems We See in White Plains Homes
- Coal-to-oil conversion legacy: Flue tiles originally sized for coal furnaces are undersized or offset for modern oil appliances, causing draft failure and liner deterioration that isn’t visible without a Level 2 inspection. We find this in roughly half the pre-1960 White Plains homes we inspect.
- Two-flue stacks with unrelined oil sides: In Battle Hill and Gedney Farms colonials, it’s common to find a single chimney stack serving two flues - one for an oil burner (originally coal) and one for a wood-burning fireplace - where the oil-side flue was never relined after fuel conversion. Westchester County home inspectors routinely flag this during real estate transactions.
- Freeze-thaw mortar spalling: White Plains’s inland location produces sharper temperature swings than coastal Westchester towns. Water infiltrates through cracked crown mortar, freezes, and spalls brick faces and mortar joints, weakening the liner structure and accelerating clay liner cracking from thermal shock.
- Undersized flues in multi-family conversions: The pre-war brick apartment buildings near downtown White Plains often had their central chimney systems modified during condo conversions without proper engineering review, leaving flues that don’t match the installed appliances for draft or clearance.
Pricing for Chimney Liner & Rebuild in White Plains, NY
| Service | Typical Range in White Plains |
|---|---|
| Stainless steel liner, single flue | $2,800 - $4,200 |
| Flexible liner with offsets | $3,200 - $4,800 |
| Full liner replacement | $3,500 - $5,500 |
| Partial rebuild (crown, top courses) | $4,500 - $6,800 |
| Full chimney rebuild | $8,500 - $15,000+ |
| Level 2 inspection with camera and photo report | $289 - $389 |
What moves you within these ranges? Height and scaffolding requirements, number of flues, whether we need to navigate offsets from old coal flues, and the condition of the existing crown and exterior masonry. We don’t guess. Every estimate starts with a Level 2 camera inspection - you’ll see what we see, and we’ll explain exactly what needs to happen now versus what can be monitored. No-hassle upfront pricing means the number we quote is the number on the invoice. Call (914) 603-1360 for your free estimate.
We Also Serve Cities Near White Plains
Our crews work throughout central Westchester, including White Plains and the surrounding communities of Hartsdale, Elmsford, Scarsdale, and Valhalla. If you’re in one of these towns and your chimney shares the same coal-conversion history or freeze-thaw exposure, the same inspection and repair approach applies. Scheduling is coordinated from our New York City office, with local crews dispatched to your area.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in White Plains
Not necessarily both, but the oil-side flue almost always needs attention. In White Plains colonials built in the 1940s and 1950s, the oil burner flue was frequently left unlined after the original coal-to-oil conversion, while the fireplace flue may still have intact clay tile. Our Level 2 camera inspection checks each flue independently. We’ve found plenty of cases where the fireplace flue is sound for another decade but the oil flue is actively hazardous. Call (914) 603-1360 and we’ll inspect both - estimates are free.
You probably can’t tell from the ground, which is why we use a camera. In White Plains, freeze-thaw damage to clay liners typically shows as vertical cracking, spalled tile surfaces, or missing sections - damage that progresses from the outside in as water infiltrates through compromised mortar joints. If you’ve noticed brick faces flaking on your chimney exterior, or if your chimney crown has visible cracks, the liner inside is likely taking damage too. The only way to know for certain is a Level 2 inspection with photo documentation.
Westchester County home inspectors routinely flag two issues in Battle Hill colonials: unrelined oil-side flues in two-flue stacks, and deteriorated crown mortar from freeze-thaw exposure. Both are documentation items that can delay closing if the seller won’t address them or provide a recent inspection report. We provide written photo documentation and plain-English verdicts that satisfy most purchase contingencies. If you’re the buyer, a pre-inspection gives you negotiating clarity; if you’re the seller, it heads off last-minute surprises.
A partial rebuild addresses the crown, upper brick courses, and sometimes the top flue section while preserving sound lower structure - appropriate when damage is localized from crown failure or freeze-thaw exposure at the top. A full rebuild removes and reconstructs the entire chimney above the roofline, necessary when multiple courses are compromised, the flue structure is failing throughout, or the chimney has shifted off-plumb. We never recommend full rebuilds without camera evidence showing why partial repair won’t suffice. Most White Plains homes we see qualify for partial solutions.
Yes, and it’s often required. Fireplace inserts in original fireplaces need a properly sized stainless liner from the insert collar to the top of the chimney to maintain safe draft and clearance to combustibles. In White Plains homes with the common two-flue stack configuration, we size the liner to serve only the fireplace flue while leaving the oil or gas appliance on its own properly lined flue. We use DuraFlex or Olympia Chimney stainless systems, and most installations are completed in a single visit with the insert already on-site.
We were called to a 1940s colonial on Battle Hill where the single chimney stack carried two flues - one for the oil burner, one for a wood-burning fireplace - and the oil-side flue had never been relined after the original coal-to-oil conversion. During a Level 2 inspection our tech found the clay liner tiles were undersized and offset, with first-degree creosote already building on the fireplace side and spalling mortar at the chimney crown from years of freeze-thaw cycling. We installed a stainless steel DuraFlex liner on the oil flue, rebuilt the crown, and brought the fireplace side up to draft code - the whole job passed county inspection on the first walkthrough.
White Plains’s coal-to-oil conversion legacy means chimneys here were built with flue tiles sized for coal furnaces then repurposed for oil without relining - so technicians in White Plains routinely find undersized or offset flue tiles and deteriorated clay liners that neighboring Scarsdale and Harrison properties almost never present at the same frequency. This isn’t a minor historical footnote. It changes the inspection protocol, the repair approach, and the pricing reality for homeowners in this specific market. Anyone telling you that a White Plains chimney inspection is the same as one in a neighboring town hasn’t spent enough time looking up these flues.
Ready to know exactly what condition your chimney liner is in? Call (914) 603-1360 for a free estimate. A live person will answer, we’ll schedule your Level 2 inspection with camera and photo report, and you’ll get a plain-English verdict with no pressure and no surprises on the bill. Done right - and we stand behind it.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving White Plains and Westchester County since 1984.