Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Scarsdale
Chimney liner replacement and partial rebuilds in Scarsdale typically run $2,800-$7,500 depending on flue count and access, with most Level 2 inspections completed same week. If your Scarsdale home was built between the 1920s and 1940s, its chimney was almost certainly designed for coal or oil and later connected to gas without proper relining - a condition that violates current NFPA 211 standards and can vent carbon monoxide into living spaces. We dispatch to Scarsdale from our New York City office, and our crews know the village’s Tudor Revival estates from Fox Meadow to Heathcote because we’ve been working on them for decades. Call (914) 603-1360 to book a camera inspection - estimates are free, and you’ll see what we see before any work is proposed.
Why Hearthstone Chimney Co. Is Scarsdale’s Preferred Chimney Liner & Rebuild Company
We’ve been answering calls with a live person for over 42 years, and that hasn’t changed. When you ring Hearthstone Chimney Co., someone picks up - 24 hours a day, every day - not a voicemail tree, not a callback queue. Our Chimney Liner & Rebuild team serves Scarsdale homeowners who’ve learned the hard way that not every contractor does what they promise.
Our reputation here is built on documentation. Every Level 2 inspection ends with photos you can see and a plain-English verdict - no jargon, no pressure. We’ve worked on chimneys along Post Road, in the Greenacres neighborhood, and throughout the village’s historic districts. Scarsdale’s building department knows our permits. Our technicians are background-checked, uniformed, and complete most liner replacements and partial rebuilds in a single visit.
The 90-Day Done Right Promise governs everything we do: Krafted right, Every time, Your home first, Standing behind it. In writing. No arguing. If it’s not right, we come back. That promise has outlasted three generations of fly-by-night operators in Westchester County.
Our Chimney Liner & Rebuild Services in Scarsdale
Stainless Steel Liner Installation
Most Scarsdale Tudors need a stainless steel liner sized precisely to their current appliance, not the original coal flue. We use DuraFlex and Olympia Chimney products - professional-grade, not builder-grade substitutes - and we measure twice because a liner that’s even slightly undersized creates drafting problems that show up on the first cold morning. A typical stainless steel liner installation in Scarsdale runs $3,200-$5,800 for a single-flue system, including the Level 2 inspection and photo report. We pull permits through Scarsdale Village Hall when required and coordinate inspections so you’re not chasing paperwork.
Flexible Liner for Tight Flues
Some of Scarsdale’s 1920s chimneys have offset flues or tight bends that rigid pipe won’t navigate. Flexible liners from trusted manufacturers thread through these obstacles without breaking masonry. We’ve installed flexible liners in Heathcote estates where the original builder tucked a flue behind a staircase, and in Fox Meadow homes where decades of settling shifted the stack. The work costs roughly what a standard stainless installation does - $3,000-$5,500 - but the difference is a liner that actually fits versus one that leaks at every joint.
Liner Replacement
This is where Scarsdale’s housing stock creates the most urgent need. Because Scarsdale’s Fox Meadow and Heathcote Tudors were built with flues sized for coal or oil and then tied to gas furnaces during mid-century conversions, most of these 80-100-year-old stacks are undersized for their current appliance and violate NFPA 211 - a failure that is invisible from the hearth and only shows up on camera. At a 1928 Tudor Revival off Fox Meadow Road, our tech ran a camera up a flue that had been connected to a gas furnace since the 1950s and found the original clay tile cracked and offset at three joints, with a draft that stalled on every cold start. We set a DuraFlex stainless liner sized to the appliance, rebuilt the eroded mortar at the crown, and the homeowner watched the whole pass on our monitor before agreeing to a single dollar of work. Liner replacement in Scarsdale typically ranges $2,800-$6,200 depending on flue height, appliance count, and whether the clay tile must be removed first.
Partial Chimney Rebuild
Westchester’s freeze-thaw cycle - temperatures crossing 32°F dozens of times each winter - spalls the soft brick and mortar on Scarsdale’s oldest chimneys faster than newer construction. When the crown, shoulders, or upper courses have deteriorated but the lower stack is sound, we rebuild only what needs rebuilding. A partial rebuild on a Scarsdale Tudor typically runs $4,500-$8,500, including matching the original mortar color and brick profile where possible. We don’t tear down sound masonry to pad a bill. The camera shows what’s solid and what’s not.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Scarsdale
We stock professional-grade materials from Gelco, Olympia Chimney, and Famco - brands that meet or exceed NFPA 211 and UL 1777 standards. These aren’t substitutes sourced from a big-box clearance rack. When a Scarsdale homeowner needs a liner or rebuild component, we don’t wait two weeks for a drop-ship. Our trucks carry the common diameters and fittings for the village’s typical gas furnace and fireplace configurations, which means most jobs start and finish in one visit. No-hassle upfront pricing applies to every brand we install: the number on the estimate is the number on the invoice.
Common Chimney Liner & Rebuild Problems We See in Scarsdale Homes
- Original clay-tile flue liners crack and spall through Westchester’s freeze-thaw cycle. Temperatures regularly cross 32°F between November and March, and the soft brick and mortar common on Scarsdale’s 1920s-30s chimneys absorbs moisture that expands and contracts until the liner fails. Cracked tiles drop shards that block draft and vent carbon monoxide back into the house.
- Gas furnaces connected during mid-century conversions into coal- or oil-sized flues create undersized, over-drafted conditions. These installations never met NFPA 211 and look perfectly normal from the firebox. Only a camera inspection reveals the mismatch between flue volume and appliance output.
- Slow, low-temperature aesthetic fires build glazed creosote faster than roaring fires. Affluent Scarsdale homeowners typically burn small, decorative fires rather than all-night heating loads. The barely-used chimney is often the most hazardous one on the block because stage-two and stage-three creosote forms at temperatures too low to burn it clean.
- Multi-flue stacks on large estates hide problems in flues that haven’t been inspected in decades. Many Scarsdale homes have two to four fireplaces in a single tall masonry chimney. A sweeping appointment covers multiple flues, but each one needs its own camera pass. The flue you never use may be the one with the cracked liner venting into your attic.
Pricing for Chimney Liner & Rebuild in Scarsdale, NY
Here’s what chimney liner and rebuild work costs in the Scarsdale market:
| Service | Typical Range in Scarsdale |
|---|---|
| Level 2 camera inspection with photo report | $250-$450 |
| Stainless steel liner (single flue, standard access) | $3,200-$5,800 |
| Flexible liner installation (offset or tight flue) | $3,000-$5,500 |
| Liner replacement with clay tile removal | $2,800-$6,200 |
| Partial chimney rebuild (crown, shoulders, upper courses) | $4,500-$8,500 |
| Full chimney rebuild (rare; extensive deterioration) | $12,000-$22,000 |
What moves the number? Height of the stack, number of flues, interior versus exterior access, and whether the existing clay tile must be demolished and removed. We don’t guess. We run the camera first, show you the footage, and give you a single written price before any work begins. Estimates are free. Call (914) 603-1360.
We Also Serve Cities Near Scarsdale
Our crews work throughout southern Westchester County. We regularly handle Chimney Liner & Rebuild in Scarsdale and neighboring communities including Hartsdale, White Plains, Irvington, and Harrison. The same live-answer phone, same camera documentation, same 90-Day Done Right Promise applies wherever we go.
Serving Scarsdale, NY - Our Local Coverage Area
We’re based in the Scarsdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Scarsdale
Almost certainly yes, and the condition is dangerous. Most Scarsdale Tudors were built with flues sized for coal or oil, then connected to gas furnaces during mid-century conversions without relining, creating undersized conditions that violate NFPA 211 and can vent carbon monoxide into living spaces. The hazard is invisible from the hearth and only visible on camera. Call (914) 603-1360 for a Level 2 inspection - estimates are free, and you’ll see the footage before any work is proposed.
A routine sweep cleans accessible soot from a fireplace that is known to be in good condition. A Level 2 inspection uses a video camera to examine the full length of every flue, the smoke chamber, and the exterior masonry for hidden damage, improper construction, or code violations. In Scarsdale’s 80-100-year-old chimneys, the problems that matter - cracked clay tile, undersized flues, deteriorated mortar - are inside the wall where a brush can’t reach them. We include the photo report with every Level 2 inspection so you have documented evidence of what we found.
Most Scarsdale chimneys need only partial rebuilding - crown, shoulders, or upper courses where freeze-thaw damage concentrates. We rebuild only what the camera and physical inspection show to be unsound. Full rebuilds are rare and reserved for chimneys with structural failure through multiple courses or severe leaning. The camera footage shows you exactly which is which before any masonry comes down. Call (914) 603-1360 to schedule an inspection.
Yes, and it may be more hazardous than a chimney used for daily heating. Slow, low-temperature aesthetic fires produce stage-two and stage-three glazed creosote far faster than fully loaded firebox burns. The “lightly used” chimney in Scarsdale is often the most dangerous one our technicians encounter because the homeowner assumes minimal use means minimal risk. Glazed creosote cannot be removed with standard brushing and requires chemical treatment or rotary cleaning. A Level 2 inspection reveals whether this condition exists in your flue.
No. We don’t recommend any product, any brand, or any scope of work until we’ve run the camera and shown you the footage. Every chimney in Scarsdale is different - flue diameter, appliance type, height, offset, and existing damage all determine the right material. We carry DuraFlex, Olympia Chimney, Gelco, and other professional-grade options, but the specification follows the inspection, never the other way around. That’s the K.E.Y.S. code: Your home first. Call (914) 603-1360 to book your inspection.
Ready to see what’s inside your chimney? Call Hearthstone Chimney Co. at (914) 603-1360 for a free estimate. A live person will answer, 24 hours a day. We’ll schedule your Level 2 camera inspection, show you exactly what we find, and give you upfront pricing with no surprises on the bill. Done right - and we stand behind it.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Scarsdale and Westchester County since 1984.